The serpentine belt–or fan belt, as it’s generally referred to as–interprets the torque from the engine’s crankshaft to varied parts, such because the alternator, air con compressor and power-steering pump. If the serpentine belt exhibits indicators of fraying, cracking, glazing or lacking ribs, it needs to be changed instantly. When changing the belt on a Ford Escape, it’s best to be accustomed to the belt routing earlier than remove the present belt. A belt-routing diagram is printed on a white sticker and positioned within the engine bay for reference.
Ford Escape Serpentine Belt Installation Instructions
Put your security glasses on, open the hood and find the belt tensioner. It resembles an arm with a small pulley on the finish of it, which applies strain to the serpentine belt, therefore the title.
Insert the tip of the belt tensioner device into the opening within the aspect of the tensioner and thoroughly pry it away from the belt. You should buy the device at most main auto elements shops or from knowledgeable device vendor. Slip the belt off the tensioner pulley with a free hand after which launch the stress on the tensioner and take away the software.
Attain down with each fingers and take away the belt from every pulley, then pull it up and out of the engine bay. Evaluate it to the substitute belt to verify each are of equal size and width earlier than shifting on to Step four.
Observe the belt routing diagram and slip the belt across the crank pulley (the big one on the backside heart of the engine) after which route it round every pulley, leaving the tensioner pulley for final. It’s possible you’ll must climb underneath the automobile at instances whereas routing the belt, relying on the yr and type Ford Escape.
Slip the tensioner instrument again into the tensioner and pry the tensioner again as soon as extra. Place the belt over the tensioner pulley with a free hand. Launch the stress on the tensioner after which take away the tensioner software. Visually confirm the belt routing is an identical to that on the routing chart after which begin the engine. Watch to verify the belt is shifting correctly.
[source ehow.com]
